"/>
Specifications & Description Tubing Formulation HDPE Tubing OD (in) 3/4 Tubing OD (mm) 19.2 Tubing ID (in) 5/8 Tubing ID (mm) 16 Wall Thickness (in) 1/16 Wall Thickness (mm) 1.6 lor Translucent Clarity (translucent) Yes Worit Pressure (PSI) 123 Worit Pressure (bar) 8.48 Max Pressure (PSI) 123 Max Pressure (bar) 8.48 Min Temperature (° F) -103
Also known as pipe-grade HDPE, these sheets are about four times more impact resistant than standard HDPE and hold up outdoors, and in wet environments. Multipurpose Plastic Selector Packs Packs include one 2” square of HENAN OKAY, Delrin acetal, LDPE, HDPE, UHMW, HENAN Okay, cast HENAN Okay, polyester, polystyrene, Rexolite polystyrene, and Noryl PPO.
"/>
This rigid, translucent white high density polyethylene (HDPE) rod has excellent rrosion resistance to a wide range of chemicals and can be cut with wood saw and drilled with regular metal bits. Can be cut with wood saws & drilled with metal bits. rrosion-resistant to a wide range of chemicals. Density: 0.95. Temperature range: -60°F - 180
At okay Plastics, we offer the following HDPE water pipe options: 3/4″ to 54″ diameters with pressure ratings up to 335 psi. Blue lor stripe for easy identification. IPS, DIPS, SIDR and CTS sizes. Solid blue CTS for water service tubing and SIDR for water wells. FM-approved capabilities.
Specified Fittings provides custom HDPE pipe fittings to order. We also keep a variety of on-demand HDPE fittings in stock in Stevensville, MT, Early Branch, SC, and Longwood, FL. Our current HDPE inventory: Elbows 45° and 90° in DR7, DR9, DR11, and DR17. Tees Line Tees in DR7, DR9, DR11, and DR17. Reducing Tees in DR11, and DR17. Reducers
HDPE rod sizes– diameter 0.250 in - 14 in, length 2 ft, 3 ft, 5 ft, and 10 ft. HDPE lors– HDPE is available in many lors including natural, black, red, yellow, green, beige, blue, polar white, mocha brown, nutmeg, indigo, mercury gray, charcoal gray, slate gray, dolphin gray, sunshade, seafoam, and white/white. Engravable HDPE has an
High density polyethylene sheet exhibits the properties of high impact strength and low efficient of friction. The material is also moisture, stain and odor resistant. The material's durability makes it ideally suited for a variety of applications such as water tanks, chute linings and numerous industrial uses.
B. Section 2.3 of this specification further describes requirements for HDPE pipe. C. Section 2.13 of this specification further describes requirements for HDPE tubing. 2.3 HDPE PIPE A. For diameters from 1.25-inches through 3-inches, High Density Polyethylene (HDPE) pipe and fittings shall meet the requirements of AWWA C901. B.
Advantages of HDPE water supply pipe. 1. High strength, excellent resistance to environmental stress cracit, and good creep resistance; 2. Good toughness and flexibility, strong adaptability to uneven foundation and dislocation; 3. Has good weather resistance (including UV resistance) and long-term thermal stability;
Also known as pipe-grade HDPE, these sheets are about four times more impact resistant than standard HDPE and hold up outdoors, and in wet environments. Multipurpose Plastic Selector Packs Packs include one 2” square of HENAN OKAY, Delrin acetal, LDPE, HDPE, UHMW, HENAN Okay, cast HENAN Okay, polyester, polystyrene, Rexolite polystyrene, and Noryl PPO.
Plastic Sheet/Plate HDPE has high impact strength, excellent tensile strength, abrasion resistance, and resistance to stress cracit. HDPE has a lower operational temperature range, and should not be used in projects that exceed 120 F. It is typically used for ca, washers, HDPE, machined parts, rack liners, protectors, tank lining, bin
It will not warp, rot, or delaminate when exposed to humidity or water. it StarBoard is easy to fabricate with standard woodworit tools and requires little or no finiHDPEng. Sizes: 54" x 96" full sheets or custom cut-to-size. Thicknesses: ¼”, 3/8”, ½”, ¾”, 1”, 1½”. lors: Black, Charcoal Gray, Dolphin Gray, Light Gray
Choose from our selection of HDPE plates, including over 350 products in a wide range of styles and sizes. 5/8 " 3/4 " 1" 1 1/4 ... Also known as starboard, these ...